Polyurea Coating Consultants - Hotspray Industrial Coatings

Established in 1996, Hotspray Industrial Coatings Inc. is an industrial & specialty coatings company. We try to get rid of constant upkeep issues, forestall corrosion, and enhance security, while utilizing environmentally friendly product utility systems. We specialize in Polyurea Coatings, MMA & Broadcast Flooring, Media Blasting, Urethane Concrete, Industrial Painting and lots of other software methods. All these applications are used for bridges, tanks, secondary containment, flooring, partitions and extra. As well as, we provide all the correct floor preparation options to make sure you will have the perfect coating application attainable.

The selection between the different polyurethane (PU) technologies is based upon completely different parameters (see Determine 2). Polyurethane presents the best compromise between value and high quality, but is limited by utility efficiency. The polyurethane system is susceptible to blistering when the substrate accommodates more than 5% humidity. That is due to the competitors between hydroxyl-polyols and water for the reaction with an isocyanate group. Humidity content of the atmosphere and the application temperature are limiting components for polyurethanes and other chemically reacting methods.

Right here comes the function of the poly aspartic. It'll delay the curing course of for a bit of time. In this fashion, an installer who wants to use coating designs like chips or vinyl flakes, or coloring can add them up. Also, it helps the coating disperse excessive.

If a garage is small, one individual is usually sufficient to finish the task by themselves. The method begins with cutting in with a 3″ brush after which rolling the inside area utilizing a lint-free medium or brief pile roller. In a double garage or one with a larger floor, it is recommended to have not less than two installers. One can brush the coating to the perimeter of the inside, and the other can begin from a set point internally and roll out from that spot.

Application
Use solely heated, excessive strain spray gear & impingement gun. Maintain a fluid stress minimal of 2,000 psi and minimal heat 160oF. Substrate Floor temperature must be -20F to 120F. Apply at no less than 5F above dew level. Apply at specified mil thickness over primer as required for the applying.